Table of Contents
Advertisement
Getting Started
All keypress information refers to the remote control unless the instructions
indicate otherwise.
1.
Prepare the connections and power supply (see the Connections section
of this manual for more information).
2.
Press
to turn the unit on.
3.
Set your TV to display the video line connection that corresponds to
the DTV-140 (e.g., AV1, AV2, S-Video, Component, etc.) The DTV-140
output will be displayed on the TV screen when the proper line has been
selected.
4.
Press the SCAN button on the front panel to automatically search for and
store all channels within broadcast reception range.
It is only necessary to scan for channels upon initial use. See the Setup
section of this manual to edit the stored channel list.
Basic Operations
Changing Channels
Press the Channel Up or Channel Down buttons on the front panel of the unit,
or use the remote control.
Change the channel up.
Change the channel down.
Initiate direct channel access. After pressing
meric keypad to enter a channel number to change to.
Return to a previous channel.
Access the Favorite Channels list. To learn how to add channels to
the list, refer to the Setup Menu section of this manual.
www.cobyusa.com
www.cobyusa.com
USING THE DTV-140
Channel Functions
, use the nu-
Remote Key
Page 1
Page 1
Advertisement
Table of Contents
