Table of Contents
Advertisement
Chapter 3
Configuring the Cisco TelePresence System
Table 3-2
Field
CAPF Authentication String
Certificate Trust List (CTL)
Click Apply to register new or modified settings.
Step 3
Click Reset to restore the original settings.
Step 4
All codecs on the system must be connected and enabled for the factory reset to complete. To register a
Note
device, see the
Configuration Guide for the Cisco TelePresence
Related Information
See the following documentation for more information about Cisco Unified CM:
•
•
Address Book
The Address Book window displays read-only entries that have been set during Cisco Unified CM
configuration. You can create listings for up to 40 meeting rooms.
To view the phone list of Cisco TelePresence system-enabled meeting rooms, follow these steps:
Step 1
Choose Configuration > Address Book.
Step 2
Use Cisco Unified CM to make changes to the Address Book. See the
Manager Configuration Guide for the Cisco TelePresence
Telephony Settings
The Telephony Settings window displays read-only information about the telephony settings for the
Cisco TelePresence System that were set in the Cisco Unified CM.
To view entries in the Telephony Settings window, follow these steps:
OL-13676-05
Cisco Unified Communications Manager Settings
"Optional Hardware"
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence System
Cisco Unified Communications Manager (CallManager) Documentation Roadmaps
Settings
Enter the Certificate Authority Proxy Function authentication
string. The characters entered in this field must match the CAPF
Authentication string entered in Cisco Unified CM.
The Delete CTL button becomes active when the CTS is provided
with a CTL by a Cisco Unified CM configured in mixed
authentication mode.
Click Delete CTL to delete all entries on the CTL.
section of the
Cisco Unified Communications Manager
System.
System.
Cisco TelePresence System Release 1.6 Administration Guide
Address Book
Cisco Unified Communications
3-11
Advertisement
Table of Contents
Troubleshooting
