HP Neoware e140 - Thin Client User Manual page 282

Wyse Emulations
266 Setup Options
Colour support
Factory default: Unchecked
When this option is checked, an additional set of host commands
will be recognized to determine the colours used for the display.
Wyse 350 colour commands will be recognized in all modes except
Wyse 60, which will use Wyse 60 colour commands.
Application key mode
Factory default: Unchecked
When application key mode is selected, the function keys and
certain editing keys will send application codes when pressed,
regardless of whether or not the keys have been redefined. When this
option is not selected, the keys will send their programmed
definitions.
CR = CR/NULL
Factory default: Checked
This option allows you to disable the NULL being automatically
sent on CR.
Block mode
Factory default: Unchecked
This option applies to all emulations. In Block mode, keyboard
entered data is displayed and processed locally, allowing you to edit
it before a block of data is sent to the host. When Block mode is dis-
abled, data is sent to the host as it is entered at the keyboard.
Block end
Factory default: US/CR
This option applies to all emulations and specifies the ASCII charac-
ters used to indicate the end of a line and a block when a block of
data is sent to the host.
When set to US/CR, the line terminator is a US character and the
block terminator is a CR character. When set to CRLF/ETX, the