HP Neoware c50 - Thin Client Manual page 10

Terminal Management
Logging
Reserved for future options.
Proxy Server
Lets you define a proxy server for firmware updates. This is needed in case there is a proxy
server between THINTUNE clients and the Firmware Server.
Set Default Group
Lets you define a default group for the selected subnet. THINTUNE Thin Clients which log
on the THINTUNE Manager Server for the first time automatically are assigned to this
group.
Delete Subnet Database
Deletes the selected subnet
Use group settings
Lets you define if Thin Clients which are included in the selected group should be assigned
a configuration or not.
Note
The "Managed"-option by default is switched off! This is to
prevent your Thin Clients from being assigned a (new)
configuration immediately after THINTUNE Manager is installed.
Therefore this option needs to be activated if desired.
Use individual settings
Lets you decide whether the terminals in your subnet will be assigned a configuration or
will be set up individually.
Not managed
Terminals will not be assigned any configuration from the administration software.
Page 9