Advertisement
To properly insert the Micro SD Memory Card:
1. Turn OFF the Camera.
2. Open the battery compartment door by pressing the lock button down and
simultaneously sliding the battery door in the direction of the arrow on the door.
3. Insert the Micro SD Card into the Micro SD Card slot in the direction as shown on the
camera (see SD icon by the Micro SD card slot). Gently press the Micro SD Card until you
hear a slight clicking sound. This indicates the memory card has been inserted correctly.
Make sure that the Micro SD Card is not in LOCK position (see tiny slider on the side of the
card).
Note:
There is only one right direction to insert the Micro SD memory card into the slot. Do not
force the card into the memory card slot, since it may damage both the camera and the
Micro SD memory card. Re-align the Micro SD card position (as marked) and try again.
After the camera is powered on, a memory card icon will appear on the LCD display. If
you do not see the SD icon on the display, please check if the card was inserted
properly.
IMPORTANT: The Micro SD memory card must be formatted before taking
photographs.
If your SD card is new, or if it was used with other cameras or devices, you need to FORMAT
the card - see simple steps below. If the SD card was previously used, make sure to save all
needed photos and videos before formatting the SD card.
Formatting the Micro SD Memory Card
1. Press the MENU button (
2. Select the Setup Menu options by pressing the UP/DOWN button.
3. Press the OK/Shutter button to enter the Setup Menu options.
4. Press the DOWN button to highlight and select the 'Format' and then press the
OK/SHUTTER button to confirm.
5. To format the Micro SD Memory Card, select 'Yes' and press the OK/SHUTTER button.
) in Photo Capture or Video Capture mode.
7
Advertisement
