Removing The Vga Thermal Plate; Removing The Floppy Disk Drive Module - Acer Aspire 1600 Service Manual

Removing the VGA Thermal Plate

1. See "Removing the Battery Pack" on page 56
2. See "Removing the Hard Disk Drive Module" on page 58
3. See "Removing the Middle Cover" on page 61
4. See "Removing the Keyboard" on page 62
5. See "Removing the Keyboard Bracket" on page 67
6. See "Removing the DC Charger Plate" on page 67
7. See "Removing the CPU Fan Sink" on page 69
8. Remove the four screws and then detach the VGA thermal plate from the main board.

Removing the Floppy Disk Drive Module

1. See "Removing the Battery Pack" on page 56
2. See "Removing the Optical Drive Module" on page 57
3. See "Removing the Hard Disk Drive Module" on page 58
4. See "Removing the Middle Cover" on page 61
5. See "Removing the Keyboard" on page 62
6. See "Removing the LCD Module" on page 62
7. See "Removing the Keyboard Bracket" on page 67
8. See "Removing the DC Charger Plate" on page 67
9. See "Removing the Upper Case" on page 70
10. Disconnect the FDD cable from the main board and remove the one screw.
73 Aspire 1600