Samsung UN65F6300AF E-Manual page 88

RGB Only Mode
●
Adjusts the red, green, and blue levels individually.
Color Space
●
Adjusts the range of colors that can be expressed on screen.
color space depending on the input signal, and
Custom
signal. allow the user to manually adjust a range of the desired color in the colors of the
input signal.
Try Now
"
Custom
mode is only available with LED 6300 series and above.
White Balance
●
Adjusts the color temperature of the picture to make white objects look white and the overall
picture appear natural. Adjust each color's luminosity with the offset menu and the brightness
with the gain menu. To restore the default values, select Reset.
10p White Balance
●
This function is not available with LED 4300, 5500 series and PDP 5500 series.
Adjusts the white balance by adjusting the brightness of the red, green, and blue elements in
10-point intervals. This option is only available when
be supported by some external devices.
Gamma
●
Adjusts the primary color intensity.
Expert Pattern
●
This function is not available with LED 4300, 5500 series and PDP 5500 series.
Displays picture calibration patterns on the screen without using a separate pattern generator or
Pattern1
filter. is used to calibrate the contrast, and
color saturation. If the screen menu disappears or a different menu is activated while the screen
is being calibrated, this option will save the changes up to that point and automatically deactivate
that menu. This feature is enabled in Component and HDMI modes only.
Motion Lighting
●
Adjusts the picture brightness depending on the on-screen movements for reduced power
consumption. This feature is only available when
available in 3D mode. In addition, adjusting
feature.
Try Now
Try Now
Native
applies a range that is wider than the input
Picture Mode
Try Now
Pattern2
Picture Mode
Contrast
or
Auto
automatically adjusts the
Try Now
is set to
is used for calibrating the color and
Standard
is set to
Brightness
automatically deactivates this
Movie
and may not
and is not