Specifications; Display Resolutions - Insignia NS-26E340A13 Important Information Manual

General
Problem Solution
No power
• Make sure that the power cord is correctly connected to
your TV and a power outlet.
• Unplug the power cord, wait 60 seconds, then plug the
cord back in and turn on your TV.
• Other devices (for example, a surround sound receiver,
external speakers, fans, or hair dryers) may be
interfering with your TV. Try turning off one device at a
time to determine which device is causing interference.
After you have determined which device is causing
interference, move it further from the TV to eliminate
the interference.
"No signal" error
• Press INPUT and make sure that you have selected the
message is displayed
correct input for the device or service you are trying to
use.
• If you are using a cable or satellite box, use the remote
that came with that box to change channels.
• Make sure that you have the correct input selected to
view channels from the cable or satellite box.
After Auto Channel
• Reception can vary by channel depending on the
Search, there are no
broadcast power level of a given station. Contact your
channels
cable or satellite TV provider.
• Make sure that the antenna or cable/satellite TV is
connected securely to your TV.
• Try replacing the cable between the antenna/cable or
cable/satellite box and your TV.
One or more channels
• Make sure that the channels are not blocked. See
do not display
"Setting parental control levels" in the online User
Guide.
• Make sure that the channels are not hidden. The
channel may have been deleted from the channel list.
You can tune to the channel by pressing the number
buttons or you can add the channel back to the channel
list. See "Hiding channels" in the online User Guide.
• If you are using a cable or satellite box, use the remote
that came with that box to change channels.
• Make sure that you have the correct input selected to
view channels from the cable or satellite box.
• If you are using an antenna, the digital channel signal
may be low. To check the digital channel signal
strength, see "Checking the digital signal strength" in
the online User Guide.
Password is lost
• Enter 9999 to access parental controls, then set a new
password. See "Setting or changing the password" in
the online User Guide.
Some settings cannot
• If a setting is grayed, the setting is not available in the
be accessed
current video input mode.
TV cabinet creaks
• When the TV is in use, the temperature rises naturally
and may cause the cabinet to expand or contract which
can cause a creaking noise. This is not a malfunction.
Control buttons do
• Make sure that the Button Lock option is set to Off.
not work
See "Locking control buttons" in the online User Guide.
• Unplug the power cord, wait a few seconds, then plug
the cord back in and turn on your TV.
TV keeps turning off
• Make sure that the sleep timer is not turned on. See
"Setting the sleep timer" in the online User Guide.
Notes
• If the problem is not solved by using these
troubleshooting instructions, turn off your TV,
then turn it on again.
• Additional troubleshooting information is in
your online User Guide. Go to
www.insigniaproducts.com, click Support &
Service, enter your model number in the
Product Search field, then click Search.

Specifications

Specifications are subject to change without notice.
Dimensions and weight
Without stand
With stand
Screen
Screen size measured
diagonally
Display type
Panel 60 Hz vs.120 Hz
Display resolution
Panel resolution
Aspect ratio
Contrast ratio (typical)–panel
Dynamic contrast ratio–
list value
Brightness (center typical)
cd/m2
Comb filter
Response time
Horizontal viewing angle
Vertical viewing angle

Display resolutions

HDMI 1.3
Component video
Tuner
Analog
Digital
Inputs
HDMI/DVI
Component video
Composite video
Shared audio (component
and composite)
S-Video
PC/VGA
3.5mm PC audio input
USB
www.insigniaproducts.com
NS-26E340A13
25.75 × 1.93 × 16.34 in. (65.4 × 4.9 × 41.5 cm)
10.472 lbs. (4.76 kg)
25.75 × 7.09 × 18.31 in. (65.4 × 18 × 46.5 cm)
11.66 lbs. (5.3 kg)
26 in.
LED
60Hz
1080p
1920 (H) × 1080 (V)
16:9
800:1
3000:1
320 nits
3d y/c digital
5 ms
140°
130°
1080p, 1080i, 720p, 480p, 480i
1080i, 720p, 480p, 480i
NTSC
ATSC, 8-VSB, Clear-QAM
2 (back), 1 (side)
E-EDID compliant
HDCP compliant
1 (side)
1 (side)
Yes
No
1 (back)
1 (back)
1 (side)
Supports JPEG and firmware upgrade
5