HP VS160 - StorageWorks DLT Tape Drive Troubleshooting Manual page 31

Is the correct SCSI host bus adapter installed?
Description
The server already has a SCSI host bus
adapter but it is difficult to determine what
type it is.
The server may not have a SCSI host bus
adapter installed.
Do drivers need to be installed and, if so, which ones
Description
It is unclear whether there is a need to
install drivers onto the system and more
help is required.
The required drivers do not appear to be
available.
Further information
If your server is in its original configuration (no SCSI
adapters have been added or removed) then use
www.hp.com/go/connect to check the
compatibility of your system. You can also check the
SCSI configuration from the boot-up screen or from
the Windows Control Panel, or by using HP Library &
Tape Tools (see page 26).
Use HP Library & Tape Tools (see page 26) to check
whether you have a SCSI host adapter on your
system. If not, you will need to purchase one.
Further information
Detailed information specific to your system can be
found on the www.hp.com/go/connect web site.
Drivers can be obtained from www.hp.com/
support. (Backup software that states support for
HP StorageWorks VS160 tape drives also provides
the required drivers.)
Future drivers will be provided via the support web
site when they become available.
31