3Ware 9500S-8 - Escalade RAID Controller User Manual page 27

Drive Information Page
Figure 19. Drive Information Page
The Drive Information page appears when you choose Information > Drive
Information from the menu bar, or when you click a port # on the Unit
Details page. If you arrive at this page from the port # hyperlink on the Unit
Information page, the line showing the port # you clicked on is highlighted.
The Drive Information page shows a list of drives on the controller specified
in the drop-down list on the menu bar, and a summary of each one.
To see the SMART data for a drive, click the link in the Port # column.
Port #.
Model.
Capacity.
on 3DM screen is calculated as 1KB = 1024. This amount may differ from the
capacity that is printed on the disk drive, where it typically has been
calculated as 1K = 1000. Consequently, the capacity of the drive may appear
smaller in the 3DM screens. No storage capacity is actually lost; the size has
simply been calculated differently for consistency.
Serial #.
Firmware.
The unit the drive belongs to, if applicable.
Unit.
www.3ware.com
The port to which the drive is connected.
The model of the drive.
The physical capacity of the drive. (Note that the capacity as shown
The serial number of the drive.
The firmware version of the drive.
3DM 2 Reference
51