Dell PowerEdge 2600 Installing Or Replacing Manual page 6

Remove the expansion-card guide:
6
a
b
F i g u r e 1 - 3 .
1-4 I n st al ling or Re p la c in g a n ER A/ O Ca r d
Press the middle of the expansion-card guide in the direction of the SCSI
backplane (away from the system board) and carefully rotate the expansion-card
guide toward the system board until the card guide retention clip unhooks from
the system board. See Figure 1-3.
Swing the expansion-card guide up and out of the way.
R e m o v i n g t h e E x p a n s i o n - C a r d G u i d e
slot
retention clip
expansion-card
guide