Adjusting The Engagement Of The Movable Knife And Fixed Knife - Brother BAS-300G-484/484SF Instruction Manual

10. STANDARD ADJUSTMENTS

10-11. Adjusting the engagement of the movable knife and fixed knife

3211Q
A. Once the movable knife (1) and fixed knife (2) are overlapping as shown in Fig. <1>, tighten the screw (3).
B. Turn the movable knife (1) while the screw (3) is still tightened. (Move in the direction of the arrow)
C. Loosen the screw (3).
D. Turn the movable knife (1) while the screw (3) is still loosened. (Move in the direction of the arrow)
Repeat above steps A B
61
Knife
Knife
C D A four or five times to maintain the cutting performance of the knife.
BAS-300G-484, BAS-300G-484 SF
<1> 4699M
Knife
Knife
4700M