JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual page 81

Item
A
Service Manager...
B
Scheduler...
C
General Settings...
D
Archive Setup...
E
Import DLKs...
F
Matrix...
G
Transact...
H
Exit
I
Device Manager
J
Add Device...
K
Edit Device...
L
Remove Device
M
Settings...
N
I/O Setup...
O
Event Buttons...
P
Generic Events...
Q
I/O Control...
Pressing the [Service Manager...] button opens a small [Service Manager]
screen, which enables you to pause/resume the Recording Server recording
program.
Use this feature when you need to pause the program, such as when configuring
PTZ cameras.
Displays the [Scheduler...] screen.
Displays the [General Settings] screen.
Displays the [Archive Setup] screen.
Not used.
Settings for using the Milestone XProtect Matrix by Milestone Systems.
For details, refer to the Milestone XProtect Matrix manual provided by Milestone
Systems.
(http://www.milestonesys.com/?cid=265)
Not used.
Closes the [Camera Recording Administator] screen.
Displays the list of all added devices and connected cameras, which provides
you with a summarized view of the surveillance system.
Starts the [Device Setup Wizard].
Displays the [Edit device settings] screen.
For deleting a device selected in the [Device Manager] section I.
Note :
● If you remove the device, you will not be able to view recorded images. Do not
delete devices that are needed to view recorded images subsequently. In this
case, select Disabled under [Camera Monitor Setup] (A Page 50) on the
[Camera Settings] screen. To view recorded images, cancel Disabled in
[Camera Monitor Setup].
For specifying the recording settings for a selected camera or settings for a
selected audio device.
Displays the [I/O Setup] screen.
Displays the [Event Buttons] screen.
Displays the [Generic Events] screen.
Displays the [I/O Control] screen.
Description Reference
Page
A Page 78
A Page 47
A Page 93
A Page 95
^
^
^
^
^
A Page 74
A Page 75
^
A Page 49
A Page 53
A Page 83
A Page 87
A Page 88
A Page 90