Gigabyte GA-M55S-S3 User Manual page 37

NV SATA 2 Secondary RAID
Enabled Enable RAID function for the second channel of the second SATA controller. (Default value)
Disabled Disable the RAID function of this channel. It will operate in ATA mode.
On-Chip IDE Channel0
Enabled Enable onboard first channel IDE port. (Default value)
Disabled Disable onboard first channel IDE port.
On-Chip MAC LAN
Disabled Disable the LAN controller built-in core chipset.
Auto Enable the LAN controller built-in core chipset. (Default value)
NV Serial-ATA Controller
Disabled Disable the 2 SATA controllers.
SATA-1 Enable the first SATA controller only.
All Enabled Enable the 2 SATA controllers. (Default value)
IDE Prefetch Mode
Enabled Enable IDE data buffer to enhance HDD transfer speed. (Default value)
Disabled Disable IDE data buffer for the system stability.
Onboard Audio Function
Auto Auto-detect onboard audio function. (Default value)
Disabled Disable this function.
SMART LAN
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Start detecting at Port.....
Pair1-2 Status =
Pair3-6 Status =
Pair4-5 Status =
Pair7-8 Status =
: Move Enter: Select
F5: Previous Values
This motherboard incorporates cable diagnostic feature designed to detect the status of the attached LAN
cable. This feature will detect cabling issue and report the approximate distance to the fault or short.
Refer to the following information for diagnosing your LAN cable:
SMART LAN
Normal / Length
Normal / Length
Normal / Length
Normal / Length
+/-/PU/PD: Value
F6: Fail-Safe Defaults
- 37 -
Item Help
= N/A Menu Level
= N/A
= N/A
= N/A
F10: Save ESC: Exit
F7: Optimized Defaults
F1: General Help
BIOS Setup