When installing: Make sure that the connector on the bottom side of the card is attached firmly to the
system board.
1110 Speaker assembly
For access, remove these FRUs in order:
•
•
•
•
•
Removal steps of speaker assembly
2
M2 × 3 mm, wafer-head, nylon-coated (4)
When installing: Attach the speaker assembly and route the cable as shown in the following figure, and
make sure that the speaker connector is attached firmly.
1120 I/O board
Color
Torque
Black
0.181 Nm
(1.85 kgfcm)
.
65