455 Staple Jam - Lexmark C792 Quick Reference

455 staple jam

1
Press the latch to open the stapler door.
Note: The stapler door is located behind the finisher.
2
Lower the latch of the staple cartridge holder, and then pull the
staple cartridge holder out of the printer.
1
3
Use the metal tab to lift the staple guard, and then remove any
jammed or loose staples.
4
Close the staple guard.
2
5
Press down on the staple guard until it into place.
9
6
Push the staple cartridge holder firmly back into the stapler unit
until the staple cartridge holder into place.
7
Close the stapler door.
8
From the printer control panel, touch Continue, jam cleared.