Mini Port Replicator - Panasonic CF-W5MWEZZBM - Toughbook W5 - Core Duo 1.06 GHz Reference Manual

Mini Port Replicator

You can use an optional mini port replicator (CF-VEBU05AU). This device frees you from
being bothered by a lot of cable connections when you carry the computer. It also allows you
to connect various peripherals.
Connect the mini port replicator to the mini port replicator connector (A).
For further information, refer to the instruction manual of the mini port replicator.
NOTE
To use the mini port replicator, set [USB Port] setting to [Enable] (default) in the [Advanced] menu of the Setup Utility.
When the mini port replicator is connected, the AC code, LAN cable and external display should be connected to the
mini port replicator.
The LAN port and external display port cannot be used.
If devices connected to USB ports (2a, 2b, 2c) does not operate:
In the case of devices with consumption voltage exceeding 100 mA, or devices for which the consumption voltage
cannot be confirmed, connect via USB port 1 or the computer's USB port.
For further information, refer to "When using a commercially available USB2.0 Hub". (
59
page 65)