Panasonic CF-74CCBEBBM - Toughbook 74 - Core Duo 1.83 GHz Service Manual page 43

10.2.13. Setting the Speaker and the LED PCB
1. Fix the LED PCB using the two Screws<N9>.
2. Set the Speaker L and R to the computer.
3. Connect the Speaker Cable L and R to the two Connec-
tors (CN1002, CN1003) on the LED PCB.
4. Fix the Speaker Cable L and R using the Tape.
5. Fix the Speaker L and R using the Speaker Holder.
Note:
Ensure the three Hooks of the Speaker Holder are securely
set in the computer.
Screws <N9>: DFHE5025XA
n n n n Soldering the Speaker Cable and Setting the Speaker Rubber
n n n n Cautions for Setting the Speaker
10-19