Panasonic CF-53AAGZX1M Operating Instructions Manual page 33

*13
Only for model with wireless LAN.
*14
Only for model with Bluetooth.
*15
Only for model with wireless WAN.
*16
Only for model with 2nd LAN.
*17
Only for model with modem.
*18
Only for model with TPM.
For information on TPM, refer to the Installation Manual of
"Trusted Platform Module (TPM)" by the following procedure.
Click (Start) and input "c:\util\drivers\tpm\README.pdf"
in [Search programs and files] and press
Click [start] - [Run] and input "c:\util\drivers\tpm\README.pdf"
and click [OK].
*19
Only for model with ExpressCard slot.
*20
Only for model without ExpressCard slot.
*21
This slot is compatible with High-Speed Mode. Operation has
been tested and confirmed using Panasonic SD/SDHC/
SDXC Memory Cards with a capacity of up to 64 GB. Opera-
tion on other SD equipment is not guaranteed.
*22
Only for model with Smart Card slot.
*23
Does not guarantee operation of all USB-compatible periph-
erals.
*24
Only for model without 2nd LAN.
*25
Does not guarantee operation of all HDMI-compatible periph-
erals.
*26
Only for model with IEEE 1394a interface.
*27
Only for model with Fingerprint reader.
*28
Only for model with Web Camera.
*29
Measured with LCD brightness : 60 cd/m
Varies depending on the usage conditions, or when an
optional device is attached.
*30
Varies depending on the usage conditions, CPU speed, etc.
*31
Approx. 0.5 W when the battery pack is fully charged (or not
being charged) and the computer is off.
<When using with 115 V AC>
Even when the AC adaptor is not connected to the computer,
power is consumed (Max. 0.2 W) simply by having the AC
adaptor plugged into an AC outlet.
<When using with 240 V AC>
Even when the AC adaptor is not connected to the computer,
power is consumed (Max. 0.3 W) simply by having the AC
adaptor plugged into an AC outlet.
*32
Rated power consumption.
*33
Do not expose the skin to this product when using the prod-
uct in a hot or cold environment. (
When using in hot or cold environment, some peripherals
may fail to work properly. Check the operation environment
of the peripherals.
Using this product continuously in a hot environment will
shorten the product life. Avoid use in these types of environ-
ments.
When using in low temperature environment, startup may
become slow or battery operation time may become short.
The computer consumes power when the hard disk is warm-
ing up during startup. Therefore, if you are using battery
power and the remaining power is low, the computer may not
start up.
*34
When reinstalling Windows using the data of the recovery
area on the hard disk, you can select the OS to be installed
*35
*36
*37
*38
Enter
.
*39
*40
2
23-E-1
page 9)
(either Windows 7 (32-bit) or Windows 7 (64-bit)). An OS that
has been installed at the time of purchase or an OS that has
been installed using the hard disk recovery function or the
recovery disc can be supported.
The downgrade service is available only for corporate users
who fulfill certain conditions.
Must be installed before use.
Perform on the recovery partition. (If this software can not be
performed on the recovery partition, perform from the recov-
ery disc)
These are speeds specified in IEEE802.11a+b+g+n stan-
dards. Actual speeds may differ.
Available when set to "AES".
Only available when HT40 enabled by the computer and
access point which associated supports HT40.
33