Connector Pin Assignments; Environmental Requirements; Physical Dimensions; Optional Equipment - Epson ActionNote 660C Product Information Manual

Power You can access the power management
features through Setup or by pressing Ctrl
Management
Alt P or Fn Esc at the MS-DOS prompt or
by pressing Fn Esc from Windows.
Power Management Options in Setup
* Default salting
Built in Power Management Options
Global When system is
Inactive for timeout
Standby
period set for Global
Standby
Suspend When system is
to inactive for timeout
memory period set for
Suspend, or
Suspend/Resumse is
pressed or battery
is low
Suspend When system is
to disk
inactive for timeout
period set for
Suspend. or
Suspend/ Resume is
pressed or battery
Slow
Description Exit
Reduces CPU dock When CPU is
speed and power required, full
used by related
components. returns instantly.
Reduces CPU If there is activity
speed further; turns from keyboard or
off LCD backlight; pointing device,
puts HDD and other
resumes full
components in performance in a
low-power state. few seconds.
CPU and DMA clock If the
Suspend/Resume
stopped; LCD and
HDD turned off; button is pressed
the system
other components
resumes.
suspended.
Saves contents of Press power on to
system and video start system Full
memory to a file on performance in
disk; than turns 30 seconds.
system off
completely.

Environmental Requirements

Operating
Condition
Temperature 42° to 95F
(5° to 35° C)
30% to 90%
Humidity
(non-condensing)
-200 to 12,000 ft
(-67 to 4,000 m)
When traveling by airplane, take the computer into the
from being stored in an unpressurized storage

Physical Dimensions

Optional Equipment

fax/modem, LAN cards, and HDD cards, etc.

Connector Pin Assignments

LCD Connector 2 (JP201)
LCD Connector 1 (JP202)
EPSON ActionNote 660
Nonoperating
-4 to 140F
(-20° to 60° C)
5% to 95%
-200 to 30,000 ft
(-67 to 10.000 m)
AN660-3