3
Press
or
to highlight Clean Print Head,
then press OK.
4
When you see this message, press OK to begin
cleaning the print head.
Cleaning takes several seconds, during which the
message Cleaning print head. Please wait.
appears on the screen.
5
When cleaning is complete, you see a message
asking if you want to print a nozzle check pattern.
46
6
To make sure the nozzles are clean, load a sheet
of photo paper, then press OK to print the nozzle
check.
If you don't want to print a nozzle check, press
Cancel to go back to the Main Menu.
7
Check the pattern to see if there are any gaps in
the lines.
OK
Needs
Cleaning
8
If there are gaps, press OK to clean the print head
again. If there are no gaps, press Cancel to go
back to the Main Menu.