Epson EPI-4000 Product Support Bulletin page 12

Q. How many pages can the EPI -4000 print before the ink cartridge needs to
be replaced?
A. In the Letter Quality mode the EPI - 4000 can print approximately 1000 pages
with 5% coverage.
2000 pages with 2.5% coverage.
Q. How do I change the default settings on the EPI-4000?
A. The printer's default setting are changed through the SelecType feature.
Follow the steps below to use SelecType:
1. Press ON - LINE button to enter off - line condition.
2. Press the SelecType button to enter SelecType mode.
3. Press the MENU button to chose a menu digit.
4. Press the < or > button to select the option digit.
5. Press the SET button to save the new setting.
6. Close the printer cover.
NOTE: Any changes that are made using the SelecType feature do not
take effect until they are saved by pressing the SET button after
each change.
Q. How much memory is in the EPI -4000? Can this memory be upgraded?
A. The EPI - 4000 comes standard with 512K of memory. To expand the
EPI-4000's memory to 2.5M, Epson offers an optional 2 megabyte memory
board.
Q. What size paper does the EPI -4000 support?
A. The EPI - 4000 supports up to 11x17 inch paper. When printing on paper
sizes other than letter size, change the paper size setting accordingly, using
the SelecType feature.
Q. Can the EPI -4000 print on envelopes?
A. The EPI - 4000 can print on plain, bond, or air mail type envelopes.
NOTE: 1. Envelope printing is only available at normal temperature.
2. Keep the longer side of the envelope horizontal.
In the Draft mode the EPI - 4000 can print approximately
PSB No: P-0668
Page: 3 of 4
Lift the printer cover.