Prior To Initial Start-Up; Control Panel; Temperature Setting Buttons - AEG ARCTIS 70128 GS Operating Instructions Manual

To remove the drawers (e.g. for cleaning purposes), pull them out as far
as the stops, lift and extract.
Prior to Initial Start–Up
Please clean the appliance interior and all accessories prior to initial
start-up (see section: "Cleaning and Care").

Control panel

1 Pilot light (green)
2 ON/OFF switch
3 Temperature setting buttons (for warmer temperatures)
4 Temperature display
5 Temperature setting buttons (for colder temperatures)
6 FROSTMATIC indicator light (yellow)
7 Push button for FROSTMATIC
8 Warning light (red)
9 WARNING OFF button

Temperature setting buttons

These buttons are connected to the temperature display.
• The temperature display is switched over from the display of the
ACTUAL temperature (one light illuminated) to the display of the
12
The temperature is adjusted using
the „+" (WARMER) and „-" (COLDER)
buttons.