Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
AC Power Connector This is a three-pronged connector that supports the power cord. Plug in the
female connector of the provided power cord into this connector, and the male into a power outlet.
Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz.
Side Panels
The Switch's side panels contain the system fans, two on the right and one on the left. The following shows the
Switch's right side panel.
System Fans These fans are used to dissipate heat. The sides of the system also provide heat vents to
serve the same purpose. Be sure not to block these openings, and to leave adequate space at the rear
and sides of the Switch for proper ventilation. Remember that without proper heat dissipation and air
circulation, system components might overheat, which could lead to system failure.
LED Indicators
The LED indicators of the Switch include Power, Console, Speed, Link/ACT, and Full. The following shows the
LED indicators for the Switch along with an explanation of each indicator.
Figure 3-2. Rear panel view of the DGS-3208TG
Figure 3-3. Right side panel view of the DGS-3208TG
Figure 3-4. The DGS-3208TG Switch LED indicators
8
Advertisement
Table of Contents
