The Appliance Needs Ventilation; Appliance Alignment - AEG ÖKO-ARCTIS 3193-4GA Operating Instructions Manual

The appliance needs ventilation

Air is fed under the door through
the vent slots in the base and is
exhausted upwards along the back
wall. To ensure proper air circula-
tion never cover or alter the vent
openings.
Attention! If the appliance is
installed under, for example, a
hanging cabinet, a clearance of at
least 10 cm between the top of the
appliance and the cabinet above it
must be maintained.
0 Break both wall spacing
elements from the plinth and
insert them into the sockets at
the back side of the appliance,
according to the figure, so that
the required wall gap for the
necessary ventilation at the back
of the appliance is provided for.

Appliance Alignment

0 In order to push the appliance to the final installation place, carefully
press at the top on the door and tilt the appliance backwards a bit. The
weight is thus transferred to the rear rollers on which the appliance can
be pushed easily.
0 The appliance must have a solid, level footing. Please compensate for
unevenness in the floor by turning the two adjustable feet at the front
in or out.
Installing and connecting
33