Table of Contents
Advertisement
D-Link DES-3010FA/GA CLI Reference Guide
interface range vlan
The interface range vlan Global Configuration mode command enables simultaneously configuring multiple
VLANs.
Syntax
interface range vlan {vlan-range | all}
Parameters
•
vlan-range — Specifies a list of VLAN IDs to be added. Separate nonconsecutive VLAN IDs with a comma
and no spaces; a hyphen designates a range of IDs.
•
all — All existing static VLANs.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Commands under the interface range context are executed independently on each interface in the range. If the
command returns an error on one of the interfaces, an error message is displayed and execution of the command
continues on the other interfaces.
Example
The following example groups VLANs 221, 228 and 889 to receive the same command.
Console(config)# interface range vlan 221-228,889
Console(config-if)#
Page 289
Advertisement
Table of Contents
