Registering a handset to the base unit
1
Base unit:
NKX-TGP500 series
Press and hold {ALL} for about 4 seconds until the STATUS
indicator flashes in red.
NKX-TGP550 series
Press and hold {ALL} for about 4 seconds until the registration tone
sounds and the STATUS indicator flashes in red.
L If all registered handsets start ringing, press the same button to
stop. Then repeat this step.
L The next step must be completed within 90 seconds.
2
Handset:
Press {OKL}, then wait until a long beep sounds.
Note:
L If an error tone sounds, or if _ is still displayed, register the handset
according to the registering section of the base unit's User Guide on
the Panasonic Web site. See page 1 for Panasonic URL.
Display language
1
{MENU} (center of joystick) i {#}{1}{1}{0}
2
{V}/{^}: Select the desired setting.
3
Press down the center of the joystick to save. i {OFF}
4