Capturing Analog Video With Windvd Creator - HP Media Center m1000 - Desktop PC Software Manual

80
HP Media Center PC Software Guide

Capturing Analog Video with WinDVD Creator

1
Click Start, choose All Programs,
InterVideo WinDVD, InterVideo
WinDVD Creator, and then click
InterVideo WinDVD Creator again.
2
Click the Capture video into hard disk
button.
3
Connect your VCR, television, or other analog
input device to the Composite Video 2 or
S-Video 2 connector on the front panel of
the PC.
4
Connect the Audio L and R connectors of your
analog input device to the Audio L and R
connectors on the front panel of the PC. Make
sure the Capture button is selected.
5
Click the Wrench icon, and then select the
Device Control tab.
6
Click the Video Source drop-down box, and
then select either S-Video 2 or Composite
Video 2, depending on which front panel
connector you are using.
7
Click OK. Your video appears in the Preview
window. To begin capturing the video, click
the Record button.
8
Enter a file name, and then click Save, and
recording begins.
9
Click the Stop button to stop capturing your
video file. Your video file is processed and
automatically saved to your hard disk drive.
10
To play back your captured video, double-
click the file.