Power Management - HP nx6310 - Notebook PC Maintenance And Service Manual

1. Prepare the computer for disassembly (refer to
"Preparing the Computer for Disassembly,"
information).Remove the real-time clock (RTC) battery (refer
to
removing and replacing the RTC battery).
2. Wait approximately 5 minutes.
3. Replace the RTC battery and reassemble the computer.
4. Connect AC power to the computer. Do not reinsert any
batteries at this time.
5. Turn on the computer.
All passwords and all CMOS settings have been cleared.

1.3 Power Management

The computer comes with power management features that
extend battery operating time and conserve power. The
computer supports the following power management features:
■
Standby
■
Hibernation
■
Setting customization by the user
■
Hotkeys for setting the level of performance
■
Battery calibration
■
Lid switch standby/resume
■
Power button
■
Advanced Configuration and Power Management (ACPM)
compliance
Maintenance and Service Guide
Section 5.14, "RTC Battery,"
Product Description
for more
for more information on
Section 5.3,
1–5