If The Wi-Fi Connection Cannot Be Established - Panasonic HC-V520K Basic Owner's Manual

If the Wi-Fi connection cannot be established

Problem
It cannot connect
to the wireless
access point.
The wireless
access point is not
detected.
Radio waves of the
wireless access
point get
disconnected.
24
VQT4Q29
(General)
≥ Turn ON the wireless access point.
≥ Approach the wireless access point and reconnect.
≥ If it takes time to complete the connection, the Wi-Fi connection will be
aborted.
Reset the connection settings.
≥ Check how to connect to the wireless access point and how to set the
security settings.
≥ Make sure the wireless access point is registered in this unit.
≥ The device may be unable to locate the wireless access point due to
problems with the signal. Use [Manual Connection].
(Easy Connection)
≥ Make sure the wireless access point is in the correct WPS standby
mode.
≥ Make sure the PIN code has been correctly input.
(Manual Connection)
≥ Make sure the SSID and password have been correctly input.
≥ Check the Authentication method, Encryption type, and Encryption
key (Password).
≥ The condition may improved by moving the location or changing the
angle of the wireless access point.
≥ If you use another 2.4 GHz band device such as a microwave oven or
cordless telephone nearby, you may interrupt the signal. Keep a
sufficient distance from these types of devices.
Check points