Advertisement
Using the Control Panel
The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
This will select one of the Control Panel icons and display its settings.
[ ] [ ] [ ] [ ]
[SET]
2.
Use [ ] and [ ] to select the setting you want to change.
1 Snapshot SKRWR size/quality
2 9LGHR image quality
3 Flash
4 Self-timer
5 Face Tracking
6 Silent Mode
*3KRWR quality cannot be changed using the Control Panel.
3.
Use [ ] and [ ] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
If you selected "MENU", the REC menu will appear.
If you selected "SCN", the Scene Mode scene menu will appear.
• You can close the Control Panel by pressing
Available settings
*
7 Simple Mode
8 REC menu display
9 Scene Mode scene selection
3
Control Panel
(Disable).
Advertisement
