Adobe 38040165 - Visual Communicator - PC User Manual page 40

Position the webcam or camcorder on top of the monitor in the center. The lens of the
camera should be as close to the top of the Teleprompter as possible so that your eyes appear
to look at the camera while you are reading the Teleprompter. If the webcam has a base,
remove it so that the camera is not too far above the monitor. Instead, secure the camera to
the top of the monitor with some tape.
Webcam secured to top of monitor with tape
Camcorders have zoom lenses that allow you to place them further back on the monitor for
additional positioning options.
If your screen resolution is higher than 1024 x 768, position the Visual Communicator screen
at the top center of the computer screen, right below the camera, or select Jump To Top Of
Screen in the Application Settings dialog box. This way you'll be looking in the same
direction as the camera.
When the camera is connected and positioned, test it by using the viewing software that came
with the webcam or capture card.