Powershot Sd100 Digital Elph/Digital Ixus Ii - Canon PowerShot G5 Software Starter Manual

PowerShot SD100 DIGITAL ELPH/DIGITAL
IXUS II
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied USB cable to the computer's USB port and the
camera's Digital terminal as shown below.
2
Set the mode switch to
power lamp lights green.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.2
See ArcSoft Camera Suite 1.2 CD-ROM (p. 104) for information about the
features and installation procedures for the programs on the disk.
Non-Supported Programs and Features
•RAW images cannot be recorded.
•The camera's LCD monitor will not display images and the Video OUT
settings cannot be set while the Viewfinder function is on in the
Shooting-RemoteCapture window of RemoteCapture.
USB Port
To the Digital
Terminal
USB Cable
and press the ON/OFF button until the
1. Slip a fingernail under the
terminal cover and lift to open.
2. Insert it all the way until it clicks.
97