Troubleshooting The Card Reader - Dell U2413 User Manual

Distorted Sound Computer's sound card is used as the
audio source
Distorted Sound Other audio source is used
Unbalanced Sound Output Sound from only one side of Soundbar
Low Volume Volume is too low

Troubleshooting the Card Reader

CAUTION:
Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media.
Problem
Drive letter is not assigned.
(Windows® XP only)
Drive letter is assigned, but the media is not
accessible
The media has been ejected during writing or
erasing.
Despite the disappearance of the pop-up
window, the media has been ejected while the
LED was blinking.
Cannot format or write on the media.
Card reader is not working
Play some audio content on the computer (i.e. audio CD, or MP3).
Turn the Power/Volume knob on the soundbar clockwise to a higher volume setting.
Clean and reseat the audio line-in plug.
Test the soundbar using another audio source (i.e. portable CD player).
Clear any obstructions between the soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
Set all Windows volume controls to their midpoints.
Decrease the volume of the audio application.
Turn the Power/Volume knob on the soundbar counter-clockwise to a lower volume setting.
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the Soundbar using another audio source (i.e. portable CD player).
Clear any obstructions between the soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the audio source.
Decrease the volume of the audio source.
Turn the Power/Volume knob on the soundbar counter-clockwise to a lower volume setting.
Clean and reseat the audio line-in plug.
Clear any obstructions between the soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the sound card or audio source.
Set all Windows audio balance controls (L-R) to their midpoints.
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the soundbar using another audio source (i.e. portable CD player).
Clear any obstructions between the soundbar and the user.
Turn the Power/Volume knob on the soundbar clockwise to the maximum volume setting.
Set all Windows volume controls to their maximum.
Increase the volume of the audio application.
Test the soundbar using another audio source (i.e. portable CD player).
Cause
Conflict with network drive letter.
The media needs reformatting.
Displays the error message, "Error copying file or folder."
Displays the error message, "Cannot write folder (folder name) or file (file
name)," during writing, or, "Cannot remove folder (folder name) or file(file
name),". While erasing, you cannot write or erase in the same folder or file
name.
Although the pop-up window disappears during writing, if you eject your
media while the LED is still blinking, then you cannot complete your action on
the media.
Write protect switch is enabled.
USB interface is not working.
Solution
A. Right-click My Computer on the desktop, and then click Manage.
Under Computer Management, click Desk Management.
B. In the list of drives in the right panel, right-click Removable
Device and then click Change Drive Letter and Paths.
C. Click Change, and in the drop-down box, specify a drive letter for
the Removable Device, choosing one that is not assigned to the
mapped network drives.
D. Click OK, then click OK again
Right-click the drive in Explorer and choose Format from the
resulting menu.
Reinsert the media and write or erase again.
Format the media for writing or erasing the same folder or file name.
Format the media for writing or erasing the same folder or file name.
Verify that the write- protect switch of the media is unlocked.
Check that your monitor is powered On.