Table of Contents
Advertisement
•
Aspect Control
(only available for the HDMI input).
•
ASCR
: turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•
Position
: adjusts the horizontal position (H-Position) and the vertical
position (V-Position) of the image. The adjusting range is from 0 to 100.
•
Focus
: reduces Horizonal-line noise and Vertical-line noise of the image
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
•
AUTO Adjust
clock, and phase.
•
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
•
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
4.
Input Select
In this function, you can select your desired input source.
5.
System Setup
Allows you to adjust the system.
•
Splendid Demo Mode
comparison. (Scenery mode/theater mode only)
•
Volume
: the adjusting range is from 0 to 100.
3-4
: adjusts the aspect ratio to full, 4:3, 1:1, or OverScan
: Automatically adjusts the image to its optimized position,
: splits the screen into two for Splendid modes
Chapter 3: OSD (On-Screen Display) menu
Hide quick links:
Advertisement
Table of Contents
