Asus MS226H - Wide LCD Monitor User Manual page 14

2. Image
You can adjust brightness, contrast, ASCR, Trace Free, sharpness, saturation,
position (VGA only), and focus (VGA only) from this main function.
P1
ASCR
Trace Free
Sharpness
Saturation
• Brightness: the adjusting range is from 0 to 100.
activate this function.
• Contrast: the adjusting range is from 0 to 100.
•
ASCR: Select YES or NO to enable or disable dynamic contrast
ratio function.
Trace Free:
•
Sharpness: the adjusting range is from 0 to 100.
•
Saturation: the adjusting range is from 0 to 100.
•
Position: adjusts the horizontal position (H-Position) and the vertical
•
position (V-Position) of the image. The adjusting range is from 0 to 100.
Focus: reduces Horizonal-line noise and Vertical-line noise of the image
•
by adjusting (Phase) and (Clock) separately. The adjusting range is from
0 to 100.
•
•
3. Color
Select the image color you like
from this function.
3-2
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
P2
Position
Focus
54
54
is a hotkey to
Chapter 3: General Instruction