Asus P4T-F User Manual page 18

3. HARDWARE SETUP
Motherboard Frequency Settings (SW1 Switches)
The motherboard frequency is adjusted through the DIP switches. The white block
represents the switch's position. The illustration below shows all the switches in the
OFF position.
P4T-F
P4T-F DIP Switches
1) JumperFree™ Mode (JEN)
This jumper allows you to enable or disable the JumperFree
™
JumperFree mode allows processor settings to be made through the BIOS setup
(see 4.4 Advanced Menu).
Setting
Enable (JumperFree)
Disable (Jumper Mode)
P4T-F
P4T-F JumperFree™ Mode Setting
18
ON
SW1
JEN
[2-3] (default)
[1-2]
1 2
Jumper Mode
ASUS P4T-F User's Manual
OFF
1. Frequency Multiple
2. Frequency Multiple
3. Frequency Multiple
4. Frequency Multiple
5. Reserved
6. Frequency Selection
7. Frequency Selection
8. Frequency Selection
9. Frequency Selection
10. Frequency Selection
™
mode. The
JEN OFF
SW1
2 3
Jumper Free
(Default)