Choosing A Startup Image; Formatting The Memory - AgfaPhoto DC-533 User Manual

Choosing a Startup Image

You can choose a recorded image as the start-up image.
1. Set the camera to the Playback mode
2. Press or
3. Press the MENU button, then press
to select S.IMAGE (
4. Press or
press the SET button.
5. Set the camera to the Setup Menu
6. Press or
press or the SET button.
7. Press or
press the SET or the MENU button to apply
the setting.
8. Press the MENU button to close the menu.
The start-up image will not be deleted even if the original image is deleted or memory
formatted.

Formatting the Memory

To erase all data stored in the memory card if you are using a card, or all data stored in the
internal memory if there is no card inserted.
1. Set the camera to the Setup Menu
2. Press or
3. Press the SET button to start format, or press the MENU button to cancel it.
A "BUSY...PLEASE WAIT" message displays and the memory card is starting format.
A "COMPLETED" message displays when finish formatting.
All data will be deleted including protected ones. Be sure to download important files to
your computer before formatting.
to select a desired image.
).
to select an option, and then
to select S.IMAGE (
to select a desired image and
to select FORMAT (
or
) then
NOTE:
) then press or the SET button.
NOTE:
- 42 -