AEG OKO-LAVAMAT 76760 Operating Instructions Manual page 33

Problem
Water is not running.
(1
Error code is shown
in the multi-display.
The washing machine
vibrates during opera-
tion or it is on an une-
ven surface.
The washing solution
of the main wash
froths up a lot.
Possible Cause
Water tap closed.
Filter in screw connection of
the intake hose blocked.
Water tap is blocked with
limescale or is faulty.
The transport packaging has
not been removed.
The height-adjustable screw
feet are not correctly set.
There is not much washing in
the drum (e.g. only one
dressing gown).
The water could not be com-
pletely pumped off before
spinning because
The drainage hose is bent
or
The drain pump is blocked.
Too much detergent was
probably used.
Operating Instructions
Remedy
Open the water tap.
Close the water tap. Unscrew
the hose from the tap, re-
move the sieve and clean un-
der running water
Check water tap and have it
repaired if necessary.
Remove transport packaging
according to the installation
and connection instructions.
Adjust the feet in accordance
with the installation and
connection instructions.
This does not impair the
function.
Check the laying of the
drainage hose and eliminate
the bend if necessary, or
clean the drain pump and, if
required, remove foreign
bodies from the pump hous-
ing.
Meter the detergent exactly
in accordance with the man-
ufacturer's information.
33