Table of Contents
Advertisement
Malfunction
2 short warning tones,
continuously repeated,
can be heard,
the programme display for
the selected wash pro-
gramme is flashing,
the indicator for the end
of the wash programme is
flashing twice
continuously .
(Rinse water has collected
in the dishwasher's interi-
or container).
3 short warning tones,
continuously repeated,
can be heard,
the indicator for the end
of the wash programme is
flashing three times
continuously .
The programme is not
starting.
Rust spots are visible in
the dishwashing compart-
ment.
26
Possible cause
The siphon is blocked.
Water drain hose has not
been correctly positioned.
The anti-flood system has
been triggered.
The mains plug is not
plugged in.
A fuse in the house's wiring
system is defective.
For dishwasher models with
a start delay timer:
A start time has been se-
lected.
The dishwashing compart-
ment is made from rust-
free stainless steel. Rust
spots in the dishwashing
compartment are due to
rust particles from external
sources (rust particles from
water pipes, pans, cutlery,
etc.). Remove such spots
with a commercially availa-
ble cleaning product for
stainless steel.
Remedy
Clean the siphon.
Check the position of the
hose.
First turn off the water tap,
then switch off the appli-
ance and contact customer
service.
Connect the plug to a mains
socket.
Replace fuse.
If the dishes are to be
washed immediately, cancel
the start delay.
Only wash cutlery, dishes
and pans that are suitable
for dishwasher use.
Advertisement
Table of Contents
