Asus E2KM1I-DELUXE User Manual page 28

Refer to the audio configuration table below for the function of the audio ports in the 2, 4, 6,
or 8-channel configuration.
Audio 2, 4, 6, 8-channel configuration
Port
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure an 8-channel audio output:
9. USB 3.0 ports 1 and 2. These two 9-pin Universal Serial Bus (USB) ports are for USB
3.0/2.0 devices.
•
•
•
•
10. eSATA port. This port connects to an external Serial ATA hard disk drive.
11. DVI-I port. This port is for any DVI-I compatible device and are HDCP compliant,
allowing playback of HD DVD, Blu-Ray and other protected content.
12. HDMI port. This port is for a High-Definition Multimedia Interface (HDMI) connector,
and is HDCP compliant allowing playback of HD DVD, Blu-ray, and other protected
content.
13. USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports are for USB
2.0/1.1 devices.
1-16
Headset
2-channel
Line In Rear Speaker Out
Line Out Front Speaker Out
Mic In
-
Use a chassis with HD audio module in the front panel to support an 8-channel audio
output.
DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows
operating system.
Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under
Windows OS environment and after the USB 3.0 driver installation.
®
USB 3.0 devices can only be used as data storage only.
We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster
and better performance for your USB 3.0 devices.
4-channel 6-channel
Rear Speaker Out
Front Speaker Out
Mic In Bass/Center
-
8-channel
Rear Speaker Out
Front Speaker Out
Bass/Center
- Side Speaker Out
Chapter 1: Product introduction
®