Acura 2008 RDX Owner's Manual page 263

Hide thumbs Also See for 2008 RDX:
Table of Contents

Advertisement

4.
Press and release the Talk button.
If you say ''Yes'' after the beep, the
HFL system response is, ''Would
you like the notification to be a
ring tone or a prompt?'' If you say
''No'' after the beep, the HFL
system returns to its main menu.
Saying ''No'' will result in no ring
tone or prompt playback during an
incoming call. The audio system
will be mute, and a message will
be displayed.
5.
Press and release the Talk button.
After the beep, say ''Ring tone'' or
''Prompt.'' The HFT system
response is ''A ring tone will be
used.'' or ''An incoming call
prompt will be used.''
Pairing Your Phone
Your Bluetooth compatible phone
with Hands-Free Profile must be
paired to the HFL before you can
make and receive hands-free calls.
To confirm that your phone is
Bluetooth compatible, visit
www.acura.com/handsfreelink or
call 1-888-528-7876. In Canada, visit
www.acura.ca, or call 1-888-9-ACURA-9.
Your phone retailer should also be
able to confirm that your phone is
Bluetooth compatible.
NOTE:
HFL does not allow you to pair
your phone if the vehicle is
moving.
For pairing, your phone must be in
its Discovery mode.
Up to six phones can be paired to
the HFL.
The following procedure works for
most phones. If you cannot pair
your phone to the HFL with this
procedure, refer to your phone's
operating manual, visit
www.acura.
com/handsfreelink
, call at
HandsFreeLink consumer
support at
(888) 528-7876
, or call
your retailer. In Canada, visit
acura.ca
, or call
(888) 9-ACURA-9
Bluetooth HandsFreeLink
During the pairing process, turn
off any previously paired phones
before pairing a new phone.
1.
With your phone on and the
ignition in the ACCESSORY (I) or
ON (II) position, press and release
the Talk button. After the beep,
say ''Phone setup.'' The HFL
response is ''Phone setup options
are status, pair, edit, delete, and
list.''
2.
Press and release the Talk button.
After the beep, say ''Pair.'' The
HFL response is ''The pairing
process requires operation of your
mobile phone. For safety, only
perform this function while the
vehicle is stopped. State a four-
digit code for pairing. Note this
code. It will be requested by the
phone.''
www.
.
CONTINUED
257

Advertisement

Table of Contents
loading

Table of Contents