Mac Filtering - ActionTec HPAP108T User Manual

Chapter 4 Using the Web Configuration Interface

MAC Filtering

Clicking MAC Filtering on the left side of any Interface screen causes the "
Filtering" screen to appear. This feature allows the user to control the wireless net-
work by denying or allowing wireless access by specifying the
Control) address of the wireless client(s) allowed or denied access on the wireless
network.
To create a list of
MAC
only stations in list" by clicking on the appropriate radio button. Then, enter the
wireless device's
MAC
to add more wireless devices. When applied, only the devices whose
are listed in the "
MAC
work. No other wireless devices will be allowed access.
To create a list of
MAC
station unless in list" by clicking on the appropriate radio button. Then, enter the
wireless device's
MAC
to add more wireless devices. When applied, only the devices whose
are listed in the "
MAC
All other wireless devices will be allowed access.
addresses allowed access on the network, activate "Allow
address in the appropriate text boxes, then click Add. Repeat
Filtering Table" will be allowed access to the wireless net-
addresses denied access to the network, activate "Allow any
address in the appropriate text boxes, then click Add. Repeat
Filtering Table" will be denied access to the wireless network.
23
MAC
(Media Access
MAC
addresses
MAC
addresses
MAC