Acer eMachines eM250 Series Service Manual page 94

1. See "Removing the LCD Panel" on page 79.
2. Lift all the adhesive strips securing the yellow 3G Antenna cable in place and remove the cable from the cable
channel.
3. Carefully pry up the Antenna pad, as shown, and remove the pad from the LCD Module.
IMPORTANT: A strong adhesive is used to secure the Antenna pad in place. Take care not to bend the pad during
removal.
4. Lift all the adhesive strips securing the blue 3G Antenna cable in place and remove the cable from the cable
channel.
84 Chapter 3