Bios Flash Utility; System Diagnostic Diskette - Acer Aspire 1310 Service Manual

BIOS Flash Utility

The BIOS flash memory update is required for the following conditions:
New versions of system programs
New features or options
Restore a BIOS when it becomes corrupted.
Use the Flash utility to update the system BIOS flash ROM.
NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery
Diskette before you use the Flash utility.
NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Flash.
NOTE: Please use the AC adaptor power supply when you run the Flash utility. If the battery pack does not
contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not
completely loaded.
Fellow the steps below to run Flash utility.
1. Prepare a bootable diskette.
2. Copy the Flash utilities to the bootable diskette.
3. Then boot the system from the bootable diskette. The Flash utility has auto-execution function.

System Diagnostic Diskette

1
IMPORTANT: The diagnostics program we use for Aspire 1310 is not exactly the same as PQA (Product
Quality Assurance), the diagnostic program we used to employ in other model. The system
diagnostic utilities is provided by Acer Headquarters. You can utilize it as a basic diagnostic tool. To
get this program, find it on CSD website. To better fit local service requirements, your regional office
MAY have other diagnostic program. Please contact your regional offices or the responsible
personnel/channel to provide you with further technical details. The diagnostic program contains a
readme file. Please read the readme file as you run the diagnostic program.
1
New added description. Please pay attention to it.
40 Chapter 2