Image Quality For Pcl; Using Afp Fonts For Ipds Printing; Implementing Afp Micr Fonts - Xerox 6100BD - Phaser Color Laser Printer User Manual

Image quality for PCL

Using AFP fonts for IPDS printing

Implementing AFP MICR fonts

MICR User Guide
The MICR fonts provided with the MX printers have been
optimized for MICR printing on these systems. Therefore, it is
important that darkening of the bitmap font is disabled when
printing PCL MICR documents. To ensure that bitmap font
darkening is disabled, follow these steps:
1. Log on as Administrator.
2. Select the Printer pull-down menu and select Image Quality.
3. In the Raster Image Processors list, do one of the following:
• If you are using the 300 dpi font (for example, E13B-
P.HPP), double-click PCL 300.
• If you are using the 600 dpi E13B font (for example, E13B-
609.HPP) or the CMC7 font (for example,
CMC72510.HPP), double-click PCL 600.
The PCL Image Quality window opens.
4. In the Thickening Control section, if the Bitmap Fonts check
box is selected, deselect it. Click OK.
5. If changes were made, a Restart confirmation prompt appears.
Click Yes to restart the Xerox FreeFlow® Print Server
software.
To implement the Xerox AFP MICR fonts in your existing IBM
MICR application, perform the steps from the following
appropriate section.
For information on installing the Xerox AFP MICR fonts, refer to
Installing Xerox AFP MICR Fonts, delivered with your MICR
system.
Existing IBM MICR implementation
1. Install the Xerox MICR fonts on the host AFP system.
2. Ensure that all other fonts used for MICR applications have
been converted to 300 dpi and loaded into the 300 dpi font
library.
3. Substitute the Xerox 300 dpi AFP MICR fonts for the line-
named IBM originals.
15