Igen3 Updates; Cmyk And Swop Workflows - Xerox 6100BD - Phaser Color Laser Printer Manual

them on the screen because DocuSP currently does
not support Pantone processing for images. The colors
for text, graphics and images can potentially show a
difference that the customer may or may not like. By
disabling Pantone processing, the customer can
eliminate this problem. If Pantone processing is
disabled, the printer can process all text, images, and
graphics as CMYK representations and color uniformity
is maintained.

iGen3 updates

CMYK and SWOP Workflows

Native Path Improvements
For the DocuSP 4.2 product, the iGen3 CMYK source
profile has been improved to more closely resemble
SWOP rendition. This enables customers who are
used to SWOP workflows to more closely emulate
SWOP output.
SWOP+ Introduction
The SWOP Gamut does not fully utilize the iGen3
gamut. The new SWOP+ color profile sets hues within
the SWOP gamut to continue to simulate a SWOP
press. Colors outside the SWOP gamut extend to the
full iGen3 gamut. This provides increased contrast and
saturation, allows smooth transition to more saturated
colors while controlling blues and dark colors. In short,
SWOP+ allows customers to leverage the larger color
gamut available in iGen3.
Updated ICC Profile: CMYK Saturated Color
through the ICC path
This updated profile allows better contrast and results
for customers implementing color management. This
profile also provides for much better ICC color
managed workflows.
18 DocuSP 3.8 and 4.0 to 4.1 Differences Document