Dell 3010cn - Color Laser Printer Manual page 54

3. Press the levers on both sides and remove any jammed print media.
NOTE: Never touch the outer levers located on both sides of the fuser unit, which are used to remove or install the fuser unit.
4. Return the levers to their original positions.
5. Close the paper cover.
6. Close the BTR cover.
7. Close the rear cover.
Removing Print Jams Near the Center Output Tray
NOTE: To resolve the message displayed on the operator panel, you must clear all print media from the print media path.
1. Open the paper cover.
CAUTION: The inside of the printer is hot.
2. Lift up the levers on both sides.
CAUTION: Never touch the outer levers located on both sides of the fuser unit, which are used to remove or install the fuser unit.
3. Open the fuser cover and remove any jammed print media.