Installing The Processor; Removing The Coin-Cell Battery - Dell Vostro 3560 Owner's Manual

j) speaker
k) system board
l) heat sink
3. Remove the screw. Remove the processor cover and lift the processor from the socket. Place it in an antistatic
package.

Installing the Processor

1. Insert the processor into the processor socket. Ensure the processor is properly seated. Replace the processor
cover.
2. Tighten the screw to secure the processor to the system board.
3. Install the:
a) heat sink
b) system board
c) ExpressCard reader
d) WLAN card
e) palmrest
f) keyboard
g) hard drive
h) optical drive
i) memory
j) base cover
k) battery
4. Follow the procedures in

Removing the Coin-Cell Battery

1. Follow the procedures in
2. Remove the:
a) battery
b) base cover
c) memory
d) optical drive
e) hard drive
f) keyboard
g) palmrest
h) ExpressCard reader
i) WLAN card
j) speaker
k) system board
3. Flip the system board and locate the coin-cell battery.
After Working Inside Your Computer .
Before Working Inside Your Computer
35