Dell Latitude 6430u Owner's Manual page 59

Option
Intel Smart Connect Technology
POST Behaviour
Table 24. POST Behavior
Option
Adapter Warnings
Keypad (Embedded)
Numlock Enable
Fn Key Emulation
POST HotKeys
Fast Boot
Virtualization Support
Table 25. Virtualization Support
Option
Virtualization
VT for Direct I/O
Trusted Execution
Description
NOTE: All charging mode may not be available for all the batteries.
Allows you to periodically sense nearby wireless connections while the system is
asleep. The option is disabled by default.
Description
Allows you to enable or disable the system setup (BIOS) warning messages when
you use certain power adapters.
Default Setting: Enable Adapter Warnings
Allows you to choose one of two methods to enable the keypad that is embedded in
the internal keyboard.
• Fn Key Only: This option is enabled by default.
• By Numlock
Allows you to enable the Numlock option when the computer boots.
Default Setting: Enable Network
Allows you to set the option where the <Scroll Lock> key is used to simulate the
<Fn> key feature.
Default Setting: Enable Fn Key Emulation
Allows you enable the sign-on screen message display indicating the keystroke
sequence to access the System Setup option menu.
Default Setting: Enable F12 Boot Option Menu
Allows you to speed the boot process by bypassing some compatibility steps.
• Minimal
• Thorough: This option is enabled by default.
• Auto
Description
Allows you to enable or disable the Intel Virtualization Technology.
Default Setting: Enable Intel Virtualization Technology
Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional
hardware capabilities provided by Intel® Virtualization technology for direct I/O.
Enable VT for Direct I/O — This option is enabled by default.
This option specifies whether a Measured Virtual Machine Monitor (MVMM) can
utilize the additional hardware capabilities provided by Intel Trusted Execution
Technology. The TPM virtualization Technology, and Virtualization technology for
direct I/O must be enabled to use this feature.
Trusted Execution — disabled by default.
59